Panasonic Lumix DMC-FS20 Operating Instructions Manual page 69

5
Move 3 to select [START] and then press [MENU/
SET].
6
Move 4 to finish the slide show.
•
Normal playback resumes after the slide show finishes.
∫ Operations performed during
The cursor displayed during playback is the same as 3/4/2/1.
•
The menu screen is restored when [‚] is pressed.
A Play/Pause
B Stop
C Back to previous picture
D Ahead to next picture
¢ These operations can be performed only in the pause mode.
E Reduce volume level
F Increase volume level
∫ Changing the slide show settings
You can change the settings for slide show playback by selecting
[EFFECT] or [SETUP] on the slide show menu screen.
[EFFECT]
This allows you to select the screen effects or music effects when
switching from one picture to the next.
[NATURAL], [SLOW], [SWING], [URBAN], [OFF], [AUTO]
•
When [URBAN] has been selected, the picture may appear in black and white as a screen effect.
•
[AUTO] can be used only when [CATEGORY SELECTION] has been selected. The pictures are
played back with the recommended effects in each category.
[SETUP]
[DURATION] or [REPEAT] can be set.
Item
[DURATION]
[REPEAT]
[MUSIC]
•
[DURATION] can be set only when [OFF] has been selected as the [EFFECT] setting.
•
[MUSIC] cannot be selected when [OFF] has been selected as the [EFFECT] setting.
Note
•
Motion pictures cannot be played back as a slide show.
•
It is not possible to add new music effects.
slide show
¢
¢
1SEC./2SEC./3SEC./5SEC.
ON/OFF
ON/OFF
C
E
Settings
Advanced (Playback)
A
D
B
F
69
VQT1M59