½¾
[REC] mode:
Taking pictures that match the scene being
recorded
(½¾: Scene mode)
When you select a scene mode to match the subject and recording situation, the camera
sets the optimal exposure and hue to obtain the desired picture.
1
Slide the [REC]/[PLAYBACK] selector switch to [¦/!], and then
press [MODE].
2
Move 3/4 to select [SCENE MODE1] or [SCENE MODE2], and then
press [MENU/SET].
•
If you set the scene modes you use frequently in [SCENE MODE1] and
[SCENE MODE2], you can then select them immediately which is very convenient.
3
Move 3/4/2/1 to select the scene mode.
•
You can switch menu screens from any menu item by rotating
the zoom lever.
4
Press [MENU/SET] to set.
•
The menu screen is switched to the recording screen in the
selected scene mode.
∫ About the information
•
If you press [DISPLAY] when selecting a scene mode in step
explanations about each scene mode are displayed. (If you press
[DISPLAY] again, the screen returns to the scene mode menu.)
Note
To change the scene mode, press [MENU/SET] and then move 1, and return to step
•
•
Refer to P41 for information about the shutter speed.
•
The scene mode flash setting is reset to the initial setting when the scene mode is changed.
•
When you take a picture with a scene mode that is not adequate for the purpose, the hue of the
picture may differ from the actual scene.
•
The following items cannot be set in scene mode because the camera automatically adjusts
them to the optimal setting.
–
[INTELLIGENT ISO]
–
[SENSITIVITY]
–
[COLOR MODE]
When taking pictures of people outdoors during the daytime, this mode allows you to
improve the appearance of the persons concerned and make their skin tones look
healthier.
* [PORTRAIT]
Advanced (Recording pictures)
3
,
3
above.
47
VQT1M59