Panasonic Lumix DMC-FS42 Operating Instructions Manual page 68

To execute retouching using the menu
Instead of the editing panel, you can correct or add effects
to pictures from [Effect] on the menu bar.
To set [Brightness & Contrast], [Hue & Saturation] and
[Sharpness], the respective windows for detailed settings
will be opened.
The setting methods are the same as the editing panel.
Whenever settings are changed, the results will be
reflected in the picture window and in the set values on the
editing panel.
To fix the contents and close the detailed settings window,
click [OK].
Click [Cancel] to cancel the setting and close the detailed
settings window. Pictures in the picture window and the
68
Retouch
settings on the editing panel will also return to the initial
states before the detailed setting window was opened.
To extract a part of a picture
It is also possible to extract only the necessary part of a
picture.
1) Select [Effect] [Crop Picture] on the menu.
The [Crop Picture] panel will be displayed.
2) Designate the necessary part by dragging the
anchor point (1) and click [OK].
2
The designated part will be extracted.
• You can also set the size of the part to be extracted by
entering a numerical value in (2).
The printed quality of the extracted portion may be of a lesser
quality than the original. This occurs more often when the
extracted portion is printed at a large size. This is normal and
not a malfunction.
Correcting pictures or add effects
1