Force P-10 Instruction Manual

there are many hazards that may affect the performance of the equipment and corresponding safety precautions that have to be observed during equipment utilization, especially:
!
- trailing or looping of lanyards or lifelines over sharp edges,
- any defects like cutting, abrasion, corrosion,
- climatic exposure,
- pendulum falls,
- extremes of temperature,
- chemical reagents,
- electrical conductivity.
personal protective equipment must be transported in the package (e.g.: bag made of moisture-proof textile or foil bag or cases made of steel or plastic) to protect it against damage or moisture.
!
the equipment can be cleaned without causing adverse effect on the materials in the manufacture of the equipment. For textile products use mild detergents for delicate fabrics, wash by hand or in a
!
machine and rinse in water. Plastic parts can be cleaned only with water. When the equipment becomes wet, either from being in use or when due cleaning, it shall be allowed to dry naturally, and shall
be kept away from direct heat. In metallic products some mechanic parts (spring, pin, hinge, etc.) can be regularly slightly lubricated to ensure better operation.
Other maintenance and cleaning procedures should be adhered to detailed instructions stated in the manual of the equipment.
personal protective equipment should be stored loosely packed, in a well-ventilated place, protected from direct light, ultraviolet degradation, damp environment, sharp edges, extreme temperatures and
!
corrosive or aggressive substances.
IT IS THE RESPONSIBILITY OF THE USER ORGANISATION TO PROVIDE THE IDENTITY CARD AND TO FILL IN THE DETAILS REQUIRED.
THE IDENTITY CARD SHOULD BE FILLED IN BEFORE THE FIRST USE BY A COMPETENT PERSON, RESPONSIBLE INTHE USER ORGANIZATION FOR PROTECTIVE EQUIPMENT.
ANY INFORMATION ABOUT THE EQUIPMENT LIKE PERIODIC INSPECTIONS, REPAIRS, REASONS OF EQUIPMENT'S WITHDRAWN FROM USE SHALL BE NOTED INTO THE IDENTITY CARD BY A COMPETENT PERSON.
THE IDENTITY CARD SHOULD BE STORAGED DURING A WHOLE PERIOD OF EQUIPMENT UTILIZATION.
DO NOT USE THE EQUIPMENT WITHOUT THE IDENTITY CARD. ALL RECORDS IN THE IDENTITY CARD CAN BE FILLED IN ONLY BY A COMPETENT PERSON.

IDENTITY CARD

MODEL AND TYPE OF EQUIPMENT
REF. NUMBER
SERIAL NUMBER
USER NAME
DATE OF PURCHASE
PERIODIC EXAMINATION AND REPAIR HISTORY
REASON FOR
DATE
ENTRY PERIODIC EXAMINATION REPAIRS CARRIED OUT
OR REPAIR AND OTHER REVELANT INFORMATIONS
1
2
3
4
SafetyLiftinGear.com
Unit R1D Rockingham Gate Poplar Way
West Cabot Park Bristol BS11 0YW
Tel: 0808 123 69 69 Fax: 0117 9381 602
sales@safetyliftingear.com
DATE OF MANUF.
DATE OF PUTTING INTO OPERATION
DEFECTS NOTED, NAME AND SIGNATURE
OF COMPETENT PERSON
Notified body, at which the European certification was Iissued
and which supervises the production of the equipment:
APAVE SUDEUROPE SAS - 8 rue Jean-Jacques Vernazza -
CS-60193 – 13322 MARSEILLE Cedex 16, France - No. 0082
PRODUCENT: PROTEKT, 93-403 LODZ, ul. Starorudzka 9, POLAND,
TEL: (48 42) 680 20 83, FAX: (48 42) 680 20 93, www.protekt.com.pl
Instruction Manual
READ CAREFULLY BEFORE USE
Safety harness is basic of fall arrest equipment and complies with EN 361.

DESCRIPTION

Full body harness P-10 is made of pieces of polyester webbing which are sewn
and connected by metal buckles.
This configuration guarantee full safety and comfort work.

BASIC EQUIPMENT

back attaching buckle - for attaching fall arrest system;
!
connecting and adjusting buckles - for comfort wearing and using of
!
harness;

SIZES

The harness P-10 is manufactured in two sizes:
- universal: M-XL
- extra large: XXL

PERIODIC INSPECTIONS

The device must be inspected at least once every 12 months from the date of
first use. Periodic inspections must only be carried out by a competent person
who has the knowledge and training required for personal protective
equipment periodic inspections. Depending upon the type and environment of
work, inspections may be needed to be carried out more frequently than once
every 12 months. Every periodic inspection must be recorded in the Identity
Card of the equipment.

MAXIMUM LIFESPAN OF THE EQUIPMENT

The maximum lifespan of the device is 10 years from the date of manufacture.
The device must be withdrawn from use immediately and destroyed when it
has been used to arrest a fall or it fails to pass inspection or there are any doubt
as to its reliability.
ATTENTION: The lifetime of the device depends on the intensity of usage and
the environment of use. Using the device in rough environment, marine
environment, contact with sharp edges, exposure to extreme temperatures or
agressive substances, etc. can lead to the wthdrawal from use even after one
use.
CONTENT OF HARNESS IDENTITY LABEL
trade mark of the device
PERIODIC
type of the device
EXAMINATION
NEXT DUE DATE
reference number
size
month/year of the device manufacture
number of the manufacturing series
number / year of the European standards
the equipment conform
CE marki n g and number of a not i f i e d body
cont r ol l i n g manufact u ri n g of t h e equi p ment (art . 11)
caution: read the manual
marking of the manufacturer
or distributor
SAFETY
THE EQUIPMENT
HARNESS
EN 361:2002 Ref.: AB 110 01
shoulder strap
connecting
and adjusting
plastic clip
of the chest
strap
connecting
and adjusting
buckle
of the thigh strap
back attaching
buckle for attaching
fall arrest system
P-10

SAFETY HARNESS

Ref. AB 110 01
identity label
Size: M-XL
XXL
Date
of manufacture: 03/2018
Serial
number: 0000001
EN 361:2002
P-10
front view
adjusting
buckle
of the shoulder
strap
thigh strap
back view