Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Force AeroCollect
Summary of Contents for Force AeroCollect
- Page 1 User Manual...
-
Page 2: Before You Start
Before you start First check that all of the parts are in the case (see section 2.1). If some- thing is missing, immediately contact AeroCollect. See section 9 for contact information. It is important that you read and understand this manual before samples are collected with the AeroCollect equipment. - Page 3 2.1 Case contents 2.2 Overview of equipment Rear Front Sampling (Green LED) Air out Wait/Error (Red LED) CE mark WEEE Batteries 2 x AA...
- Page 4 Insert the sample chamber perpendicular to the top of the AeroCollect®, as shown in the picture. The arrows on the rear of the sample chamber indicate which side shall face up and which way the chamber shall be pushed in.
- Page 5 Sampling procedure After the sample chamber has been correctly inserted into the AeroCollect ® the device is ready to collect a sample. To activate the sampling procedure press the green button on the device (shown in step 5). To activate the sampling procedure, press the green button on the device (as shown in the figure).
- Page 6 ® the procedure for the disinfection of the AeroCollect device described ® below. If the LED indicators stop working, the AeroCollect must be ® immediately sent in for servicing. Refer to the contact information at the end of this manual.
- Page 7 Insert a sample chamber inside the AeroCollect® device. Start the sampling procedure and wait until the pump starts – indicated when the green LED is lit.
-
Page 8: Troubleshooting
LED will remain unlit and the red LED will remain lit. If the problem continues, please contact AeroCollect for the purpose of having the device repaired as quickly as possible. -
Page 9: Warranty
When shipping the device, it must be sent in the accompanying case. If the AeroCollect device stops working, regardless of the reason, immediately ® contact AeroCollect for the purpose of determining the cause of the malfunction. See below for contact details. Technical specifications Battery AeroCollect is powered by two AA batteries. - Page 10 8.3.2 Recommended air humidity for AeroCollect ® Air humidity with transport, storage and use: 30% to 75% relative air humidity (non-condensing) Recommended air pressure for AeroCollect ® Air pressure with transport, normal use and storage: 700–1060 hPa 8.3.3 Recommended temperature for sample chamber: Transport and storage temperature range: -80ºC to +90ºC...
-
Page 11: Contact Information
Contact information For more information about the use of AeroCollect , contact: ® FORCE Technology AeroCollect Venlighedsvej 4 2970 Hørsholm Denmark Tel.: +45 43 25 14 00 aerocollect@force.dk... - Page 12 FORCE Technology AeroCollect Venlighedsvej 4 2970 Hørsholm Denmark Tel.: +45 43 25 14 00 aerocollect@force.dk aerocollect.dk...