Table of Contents
Advertisement
Configuring Settings with the Keyboard
Parameter List
■ Tones
Parameter
Settings
Reverb
Off, 1 to 4
Default: 2
Tone selection
See page EN-5.
Default: GRAND
PIANO
(CONCERT)
Chorus
Off, 1 to 4
Default: Off
Brilliance
–3 to 0 to 3
Default: 0
Layer balance
–24 to 0 to 24
Default: –10
Lower Pedal
Off, On
Default: Off
Damper noise
Off, On
Default: On
Select layer tone
Off, On
Default: Off
Duet mode
Off, On, Pan
Default: Off
EN-22
Operation
Type
Description
(page
EN-19)
A
Specifies the reverb of notes.
(page EN-7)
A
Assigns a tone to the keyboard.
(page EN-5)
D
Controls the breadth of notes.
(page EN-7)
B
Specifies the brilliance of notes.
Pressing [+] makes notes brighter
and harder. Pressing [–] makes
notes mellower and softer.
B
Specifies the volume balance
between the main tone and the
layered tone. (page EN-6)
D
When turned on and the BASS
(LOWER) tone is selected, pressing
the damper pedal or sostenuto
pedal will apply sustained
reverberation to the BASS
(LOWER) tone. (page EN-6)
D
Enables/disables damper noise
output. (page EN-8)
D
Enables or disables layering.
(page EN-6)
D
Enables or disables the Duet Mode.
(page EN-10)
Remarks
• To return the setting to its initial default (0),
press [+] and [–] at the same time.
• To return the setting to its initial default
(–10), press [+] and [–] at the same time.
• BASS (LOWER) cannot be layered with
another tone.
• Configuring of layering settings is not
supported for recording function Track 2
recording.
• When Pan is specified, Reverb and Chorus
effects cannot be applied.
Advertisement
Table of Contents
