Casio Privia PX-765 User Manual page 18

Hide thumbs Also See for Privia PX-765:
Table of Contents

Advertisement

2.
While holding down the FUNCTION button,
press the a button to select the track you
want to record.
• Make sure that the indicator lamp for the record track
is flashing.
Track 1: L lamp
Track 2: R lamp
Example:
Track 1 selected
3.
Select the tone and effects (Track 1 only) you
want to use in your recording.
• Tone (page EN-5)
• Effects (page EN-7)
NOTE
• If you want the metronome to sound while you are
recording, configure the beat and tempo settings,
and then press the METRONOME button. See
"Using the Metronome" on page EN-9 for more
information.
4.
Press the a button or start playing.
• Recording will start automatically.
5.
To stop recording, press the a button.
• This will cause the MIDI REC button lamp and the
lamp of the track you recorded to change from
flashing to lit.
• To play back the track you just recorded, press the
a button.
6.
After you are finished recording or playing
back, press the MIDI REC button so its lamp
goes out.
Recording to One Track while Listening
to Playback of the Other Track
1.
Press the MIDI REC button so its lamp is lit.
2.
While holding down the FUNCTION button,
press the a button to select the track you
want to play back while recording.
3.
Press the MIDI REC button so its lamp is
flashing.
• This will cause the L lamp to flash.
4.
While holding down the FUNCTION button,
press the a button to select the track you
want to record.
• Make sure that the indicator lamp for the record track
is flashing.
Example:
To listen to playback of Track 1 as you record
to Track 2
Lit (Play)
5.
Select the tone and effects (Track 1 only) you
want to use for your recording.
6.
Press the a button or start playing.
• This will start both playback of the recorded track
and recording to the other track.
• If, while recording is in progress, you want to
rerecord from the beginning, hold down the MIDI
REC button until the Digital Piano beeps. This
discards the current recording data and enters
recording standby.
7.
To stop recording, press the a button.
Recording and Playback
Flashing (Record Standby)
EN-17

Advertisement

Table of Contents
loading

Table of Contents