Figure 4 Mounting Dimensions (For Fips 140-2 Models) - Seagate ST500LX005 Product Manual

Figure 4 Mounting dimensions (for FIPS 140-2 models)

2.750 ± .010 in
69.85 ± .25 mm
0.268 ± .008 in
6.81 ± .203 mm
.230 in
5.84 mm
.263 in
6.68 mm
FIPS 140-2 Models Contain 3 Tamper Evident Stickers with the marking "Tamper Indicator - Do Not Remove".
These stickers must remain attached to provide the tamper evidence throughout the life of the drive.
Note
Removing these stickers will indicate tampering and void the drive warranty. (
Seagate Laptop Thin SSHD SATA Product Manual, Rev. J
3.951 +.008 / -.010 in
100.36 +.203 / -.25 mm
.835 ± .010 in
21.21 ± .25 mm
3.567 in
90.60 mm
.551 in
13.99 mm
Do Not Remove *
C
Tamper Indicator *
2X .118 in
2.99 mm
BOTH SIDES
3.567 in
90.60 mm
.551 in
13.99 mm
.334 ± .050 in
8.48 ± 1.27 mm
.324 ± .010 in
8.23 ± .25 mm
BREATHER HOLE,
DO NOT COVER OR SEAL
RECOMMENEDE CASE TEMP
MEASUREMENT LOCATION
ON THE END OF THE DRIVE
TAMPER PROOF LABELS ON BOTH SIDES
DO NOT PEEL OR REMOVE.
2.430 in
61.72 mm
.160 in
4.06 mm
May not represent actual labels.)
21