Panasonic Palmcorder MultiCam PV-L453 Operating Instructions Manual page 21

TV Playback or Viewing
Connect Camcorder to a TV to view
playback or recordings in progress.
Connections
Audio/
Video Out
VCR Playback using PlayPak (Optional)
Load Battery in PlayPak
Insert Cassette in PlayPak
3
Remove Cassette
1 2
Playing Back Recordings
Remove Battery lid and insert AA battery.
• Do not reverse polarity.
• Replace battery when tape loading/unloading takes longer
than usual.
1
Turn
arrow to take up any slack.
1
2
Slide RELEASE to open cassette lid.
3
2
Insert the
the left, then snap lid shut.
• Do not obstruct cassette
reel while loading.
• Allow PlayPak Load
Detector to fully retract
before using in VHS VCR.
1
2
Before you begin...
• Connect Camcorder to power source.
• Make all TV-Camcorder connections.
1
Set POWER to:
© view playback.
VCR
CAMERA © view picture as it is
2
Turn TV ON and set to LINE INPUT.
See TV owner's manual.
3
Begin playback or recording.
cassette Tape Wheel in direction of
cassette with the window up and on
Load Detector
Slide RELEASE and wait for lid to open.
Push cassette out through hole in bottom of
PlayPak with your finger.
recorded.
21