Specifications - Ryobi RSS240Q-S Owner's Operating Manual

g. Use the power tool, accessories and tool bits
etc., in accordance with these instructions and
in the manner intended for the particular type
of power tool, taking into account the working
conditions and the work to be performed. Use
of the power tool for operations different from
intended could result in a hazardous situation.
5. SERVICE
a. Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
SPECIFIC SAFETY INSTRUCTIONS FOR
SANDERS
 Always wear safety goggles and a dust mask when
sanding, especially sanding over-head.
 The product is not suitable for wet sanding.
 Do not use sanding paper larger than needed.
Extra paper extending beyond the sanding pad can
also cause serious lacerations.
 The dust bag shall be equipped with the product. It
should be emptied frequently. To connect a dust bag,
insert the adaptor of dust bag to the dust-collection
opening on the rear end of the sander.
Do not throw sanding dust on an open fi re because
materials in fi ne particle form may be explosive.
A suitable breathing respirator must be worn while
sanding lead paint, some wood and metal to avoid
breathing the harmful/toxic dust or air.
Additional safety instructions
The product is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the product by a
person responsible for their safety.
Children should be supervised to ensure that they
do not play with the product.
 Keep children and visitors away. Visitors should
wear safety glasses and be kept a safe distance from
work area. Do not let visitors contact tool or extension
cord.
WARNING
WARNING
WARNING
 It is recommended that this tool always be supplied via
a residual current device with a rated residual current
of 30mA or less.
SYMBOLS
Safety alert
V Volts
Hertz
Hz
Alternating current
Watts
W
No-load speed
n
o
min -
1
Revolutions or reciprocations per minute
Orbital diameter
Regulatory Compliance Mark (RCM). Product
meets applicable regulatory requirements.
Double insulation
Wear ear protection
Wear eye protection
Please read the instructions carefully before
starting the product.
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with your
Local Authority or retailer for recycling advice.

SPECIFICATIONS

Input
Wattage
No-load speed
Orbital diameter
Weight
APPLICATIONS
Use only for the purposes listed below:

sanding on wood surfaces

removing rust from and sanding steel surfaces

sanding plastics
2
240 V 50 Hz
240 W
-1
14,000 min
1.6 mm
1.56 kg