iLive ITB404 Quick Start Manual

Quickstart Guide
Power & Input Modes
Using the ITB404 Sound Bar
Power
Plug the small end of the power cord into the DC Input on the back
of the speaker, and the large plug into a standard wall outlet.
Indicator Lights
STATUS
Power Off
Line In Mode
Optical Mode
Aux In Mode
Bluetooth Pairing
Bluetooth Connected
iLive | ITB404
Bluetooth
Connecting your sound bar wirelessly using Bluetooth
Pairing a Bluetooth Device for the First Time
1. Power on the unit by pressing the Power button.
2. Press the
flashing blue light.
3. Press and hold the Pair button on the side of the unit.
The pairing indicator will flash blue quickly. When pairing, remain within 3 feet
of the unit.
4. Using the native controls on your Bluetooth device, select the ITB404 in your Bluetooth
settings to pair.
If your device requests a password, enter the default password 0 0 0 0 .
Refer to the user's manual for your specific device for instructions on pairing and connecting
Bluetooth devices.
5. When successfully paired and connected, a beep will issue from the unit and the Pairing
Indicator will display a solid blue light.
After initial pairing, the unit will stay paired unless unpaired manually by the user or erased due to a
reset of the device. If your device should become unpaired or you find it is unable to connect, repeat
the above steps.
INDICATOR
Red Light
Green Light
Amber Light
White Light
Flashing Blue Light
Blue Light
button on the remote to switch to Bluetooth Mode, indicated by a slowly
For FAQ, visit the support section at www.ilive.net or call customer support at: 1-888-999-4215