Table of Contents
Advertisement
en Troubleshooting
16 Troubleshooting
WARNING
Risk of electric shock!
Incorrect repairs are dangerous.
Only use genuine spare parts when repairing the appliance.
▶
If the power cord of this appliance is damaged, it must be replaced by the
▶
manufacturer, the manufacturer's Customer Service or a similarly qualified
person in order to prevent any risk.
Fault
Humming noise.
The display goes out
and Start/Pause
flashes.
The appliance is not
working.
Creasing.
36
Cause and troubleshooting
Compressor active.
Not a fault – normal operating noise.
▶
Energy-saving mode is active
Press any button.
▶
a The symbol lights up again.
Fluff filter is soiled.
→ "Cleaning the fluff filter", Page 27
▶
The mains plug of the power cord is not plugged in.
Connect the appliance to the power supply.
▶
The circuit breaker in the fuse box has tripped.
Check the circuit breaker in the fuse box.
▶
There has been a power cut.
Check whether the lighting in your kitchen or other
▶
appliances are working.
The load is too large.
Observe the maximum load capacity of the
▶
→ "Programmes", Page 22.
The laundry lies in the drum for too long after drying.
Remove the laundry from the drum as soon as the
1.
drying programme has finished.
Spread the items of laundry for cooling.
2.
Unsuitable programme for the type of fabric.
Set the suitable programme for the type of fabric.
▶
→ "Programmes", Page 22
Easy-Care fabrics are dried for too long.
→ "Changing the dryness level", Page 21.
▶
→ "Adjusting the dryness level", Page 21.
▶
Anti-Crease not activated.
Advertisement
Table of Contents
