8.18. Remove the Attachment metal
bottom
1. Remove the Radiator plate. (See section 8.13.)
2. Remove the screws (×1
ment metal bottom (L, R).
8.19. Remove the Attachment metal
top
1. Remove the Cabinet assy. (See section 8.17.)
2. Remove the screws (×3
Attachment metal top (L, R).
each) and remove the Attach-
, ×2
) and remove the
8.20. Remove the Glass holders
1. Remove the Cabinet assy. (See section 8.17.)
2. Remove the screws (×7
3. Remove the Glass holder top.
4. Remove the screws (×7
5. Remove the Glass holder bottom.
6. Remove the screws (×4
7. Remove the Glass holder side (L, R).
8.21. Remove the K-Board
1. Remove the Glass holder bottom. (See section 8.20.)
2. Remove the claw (×1
3. Disconnect the connector (K1) and Remove the K-Board
from LED Panel.
25
).
).
).
).