Sharp VC-A310X/NZ Service Manual page 87

FRONT PANEL PARTS (VC-H730X/NZ)
F
500
E
500-8
D
C
B
500-5
A
1
PRECAUTION ON FRONT PANEL SET-UP
Cassette cover
open lever
Before attaching the front
panel in position, make
sure that the cassette cover
open lever is in its right
place (lower-most). If it is
out of position, push it down
with a finger.
500-1
500-4
2 3
Cassette housing
Cassette cover
open lever
Keep the cassette over about
45° open and make sure that
the cassette cover open le-
ver is between the front panel
and the cassette cover. Now
fix the front panel in place.
500-7
500-6
4
Front panel
Cassette cover
Cassette cover
open lever
About 45°
Do not mount the front
panel with the cassette
cover tilted too open.
Otherwise the cassette
cover might wrongly run
on the cassette housing.
87
VC-A310X/NZ
VC-H725X
VC-H730X/NZ
500-3
500-2
5 6
Cassette cover
3
4
1
2
5
Removing the cassette compartment cover.
1 Open the cassette compartment cover
fully.
2 Remove the center positioner.
3 Slide the cover to the right.
4 Slightly bend the cover.
5 Draw out the left-side rod.
501