Ego Power+ Nexus Escape Operator's Manual page 16

LED LIGHTS (FIG. 5)
Your power inverter is equipped with two
LED lights located on the bottom of the
unit. These lights provide illumination of
low light areas.
To use the LED lights, press the LED
button to scroll through the following light
modes:
 Low brightness mode
 High brightness mode
 LED lights are turned off
In any mode, press and hold the LED button for more than 1 second and the lights will
switch into flashing, "EMERGENCY" mode.
NOTE:
The power inverter must be turned ON for the LED lights to function.
16
56-VOLT POWER INVERTER
LED Button
5
IN/OUT
PD-100W
FAST
CHARGE USB-C
18W
USB-A USB-C
18W
LED Lights
400W