Aux Operation; Bluetooth Operation; Pair Bluetooth-Enabled Devices - Horizon Fitness ACUSTIC O HAV-P4200 Operating Instructions Manual

AUX Operation

1 Ensure that the unit is connected to the TV or audio device.
- Connect the 3.5mm to 3.5mm audio cable (included) to the AUX
socket on the rear of unit and to the headphone socket on the audio
player.
2 Press the button on the main unit or the SOURCE button on
the remote control repeatedly to select the AUX source.
3 Start to play on the audio player.
4 Press the VOL +/– buttons on remote control or on the main unit
to adjust the volume to your desired level.

Bluetooth Operation

Pair Bluetooth-enabled Devices

The first time you connect your Bluetooth device to this player, you need to pair your device to this player.
Note:
- The operational range between this player and a Bluetooth device is approximately 8m.
- Before you connect a Bluetooth device to this unit, familiarize yourself with the Bluetooth
capabilities of the device.
- Compatibility with all Bluetooth devices is not guaranteed.
- Any obstacle between this unit and a Bluetooth device can reduce the operational range.
- Keep this player away from any other electronic device that may cause interference.
1. Press the button on the main unit or the SOURCE button on the remote control repeatedly to select
the Bluetooth® mode. The display will show "NO BT".
2. Activate your Bluetooth® device and select the search mode. "HAV-P4200" will appear on your
Bluetooth® device list.
- If you cannot find the unit, press and hold the button on the main unit or button on the
remote control to enter PAIRING MODE. The unit display will show "PAIR" and the voice prompt "Pairing" will
be heard.
3. Select "HAV-P4200" and enter "0000" for the password if necessary. If connection is successful, the display
will show "BT" followed by the voice prompt stating "Paired".
4. Play music from the connected Bluetooth device.
To disconnect the Bluetooth function, you can :
- Switch to another function on the unit.
- Disable the function from your Bluetooth device. The Bluetooth device will be disconnected from the
soundbar after the "Disconnected" voice prompt.
- Press and hold the button on the unit or button on the remote control.
25