Listen To Music From Bluetooth Device; Fm Operation; Auto Scan And Save Preset Station; Tuning In A Station - Horizon Fitness ACUSTIC O HAV-P4200 Operating Instructions Manual

Tips:
- Enter "0000" for the password if necessary.
- If no other Bluetooth device pairs with this player in 2 minutes, the player will recover the previous
connection
- The player will also be disconnected when your device is moved beyond the operational range.
- If you want to reconnect your device to this player, place it within the operational range.
- If the device is moved beyond the operational range, when it is brought back, please check if the
device is still connected to the player.
- If they are connected, display panel shows "BT".
- If the connection is lost, display panel shows "NO BT". Follow the instructions above to pair your
device to the player again.

Listen to Music from Bluetooth Device

• If the connected Bluetooth-enabled support Advanced Audio Distribution Profile (A2DP), you can
listen to the music stored on the device through the player.
• If the device also supports Audio Video Remote Control Profile (AVRCP), you can use the player's
remote control to play music stored on the device.
1. Pair your device with the player.
2. Start to play music via your device (if it supports A2DP).
3. Use supplied remote control to control play (if it supports AVRCP).
- To pause/resume play, press the
control.
- To skip to a track, press the

Auto Scan and Save Preset Station

1 Press the button on the main unit or the SOURCE button on the remote control repeatedly to select
FM mode.
2 Press and hold the
activate automatic programming. All available stations are programmed in the order of waveband
reception strength.
The first programmed radio station is played automatically.
3 Press the or buttons on the remote control to select a preset number that you want.

Tuning in a Station

Press and hold the
up automatically until a station is found. Press the
repeatedly until you find the station you want.

Presetting Stations Manually

You can preset up to 20 FM stations.
1 Tune in the desired station, then press the
remote control.
2 Press the buttons on the remote control to select the preset number.
3 Press the PROG button on the remote control to store the station.
4 Repeat above steps 1 to 3 for each station you want to store in memory with a preset number.
button on the main unit or
buttons on the remote control or on the main unit.

FM Operation

button on the unit or the PROG button on the remote control for a few seconds to
buttons on the remote control or on main unit, the frequency changes down or
button on the unit or the PROG button on the
button on the remote
buttons on the remote control or on main unit
26