Placement And Mounting - Horizon Fitness ACUSTIC O HAV-S2320 Operating Instructions Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 15

Placement and Mounting

Normal Placement (place Soundbar on leveled
surface in front of TV)
Wall Mounting (if using option-B)
Note:
-
Installation must be carried out by qualified personnel only. Incorrect assembly can result in severe personal
injury and property damage (if you intend to install this product yourself, you must check for installations
such as electrical wiring and plumbing that may be buried inside the wall). It is the installer's responsibility to
verify that the wall will safely support the total load of the unit and wall brackets.
-
Additional tools (not included) are required for the installation.
-
Do not overtighten screws.
-
Keep this instruction manual for future reference.
-
Use an electronic stud finder to check the wall type before drilling and mounting.
1
Remove the screws from the main unit.
3
Drill 2 parallel holes (Ø 3-8 mm each according
to wall type) in the wall. The distance between
the holes should be 760 mm.
5
Leave a 5-mm gap between the wall and the screw's head. Lift the unit with the attached wall brackets over the heads of
the screws and slot into place.
Attach the wall brackets to the main unit with the screws
2
removed from the main unit.
4
Firmly fix 1 dowel into each hole in the wall if necessary.
Dowel
Solid wall (solid brick, solid
concrete, solid wood, solid
wooden battens)
Drywall, plaster wall, lath
wall, etc.
20

Advertisement

Table of Contents
loading

Table of Contents