Many malfunctions and faults that can occur in daily operation can be easily reme-
died. You can save time and money in many cases, as you do not need to contact
Miele Customer Service.
Information to help you rectify faults yourself can be found at www.miele.com/ser-
vice.
The following tables are designed to help you to find the cause of a malfunction or
a fault and to resolve it.
This section only lists faults that you can remedy yourself. All other faults are
shown in
Fault FXX
Technical faults
Problem
The dishwasher does
not start.
The button does not
respond immediately or
only responds once it
has been pressed sev-
eral times.
The dishwasher stops
during a program.
.
Possible cause and solution
The door is not properly closed.
Raise the door upward until the catch engages.
The dishwasher is not plugged in.
Insert the plug.
The circuit breaker has tripped.
Reset the breaker (see data plate for the correct
fuse rating).
If the breaker trips again, contact Miele Customer
Service.
The dishwasher is not turned on.
Turn the dishwasher on with the button.
Energy management: the door was opened or closed
shortly before the button was pressed. As a result,
the dishwasher was already switched on. The elec-
tronic module requires a few seconds to be ready for
operation.
Wait a few seconds after opening or closing the
door.
Then press the button.
The circuit breaker has tripped.
Reset the circuit breaker (see data plate for the
correct fuse rating).
If the circuit breaker trips again, contact Miele
Customer Service.
Frequently asked questions
83