2Nd Interim Rinse; Software Version; Showroom Program; Factory Default - Miele G 7166 Operating Instructions Manual

Settings

2nd interim rinse

You can choose this function to in-
crease the cleaning performance of the
programs with a second interim rinse.
When this function is activated, water
consumption may increase.
If this function is switched on, it will be
applied to all programs until it is
switched off again.
40

Software version

You can display the electronic software
version of your dishwasher for technical
support purposes.

Showroom program

For demonstration purposes only.
The dishwasher is equipped with a
demo mode for showroom use.

Factory default

You can reset all dishwasher settings to
the factory default settings.
WiFi module settings (where applicable)
have to be reset separately (see
"Miele@home" under "Settings").
 Select
Reset and confirm with OK.