Download Print this page

Ikelite Sync cord Instruction Manual page 2

Advertisement

3.
Align plug and insert into the housing bulkhead. Failing to
line up the contacts properly before tightening may result
in damage to the sync cord plug and/or housing bulkhead.
Ikelite plugs are oriented by the rubber pin retainer.
Nikonos and SEA&SEA/INON plugs feature an index
recess.
4.
Hand-tighten the retaining ring.
5.
Attach a compatible strobe(s) to the sync cord using the
same method.
Dual Strobe Use
When shooting with a dual sync cord, the strobe connected
to the end with the red band is your secondary strobe. If you
want to shoot with only one strobe, this is the strobe to turn
off.
If the primary strobe is turned off or has weak or dead
batteries, the secondary strobe may not function properly.
Never dive with a connector protector attached to one
»
end of the sync cord. Cord connector protectors are not
waterproof at depth.
Maintenance and Storage
Post-Dive
1.
Submerge the fully assembled system in clean, fresh
water after each use.
2.
Remove the system from the rinse tank and flush with
running fresh water.
3.
Dry the system with a clean, lint-free cloth.
4.
Separate the components and lubricate the threads and
o-ring(s) every 2-3 days during continuous use. Separate
every day if attached to a nickel-plated brass bulkhead.
When attaching this cord to a silver-colored nickel-
»
plated brass bulkhead, the cord must be detached and
properly cleaned after each day of diving to prevent
seizing of components.
Travel and Storage
1.
Separate the sync cord from the strobe(s) and housing.
Wipe off the threads of each bulkhead and retaining ring
2.
using a clean, lint-free cloth.
3.
Lightly lubricate all o-rings, threads, and sealing surfaces.
4.
Attach the connector protector(s) and waterproof
bulkhead cap(s) to all plugs and bulkheads.
Limited Warranty
This Ikelite product is warranted against any manufacturing
defects for a period of one (1) year from the original date
of purchase. To obtain warranty service, the product must
be returned to Ikelite postage paid. Ikelite will, at its sole
discretion, repair or replace such products, and will return
to customer postage paid. All other claims of any nature are
not covered. Except as mentioned above, no other warranty
expressed or implied applies to this Ikelite product.
Contact Us
Ikelite Underwater Systems
50 W 33rd St
Indianapolis, IN 46208 USA
(317) 923-4523
ikelite@ikelite.com

Advertisement

loading