Palm Z22 Quick Start

Start here
Here's what you'll do with
Upgraders
this guide:
Be sure to synchronize your current
• Charge and set up your handheld.
handheld with your computer before
going to step 1. Also be sure to install the
• Install Palm ® Desktop software and
other important software. new CD software as described in step 3.
For more information on upgrading, go to
• Synchronize your handheld with
www.palm.com/support.
your computer.
Stylus
USB sync cable
®
Palm Z22 handheld
Software installation CD
3 3
Install software
a. Connect the sync cable to your handheld and to a USB port on
your computer.
b. To install Palm Desktop software and other important software,
insert the CD into your computer's CD drive.
Mac:
Windows:
Double-click the CD icon,
Follow the installation instructions
and then double-click
that appear on your computer
PalmSoftware.pkg.
screen.
Tip: During the installation process on
a Windows computer, you can select
USB
to synchronize with Outlook.
Upgraders
To switch from synchronizing
with Palm Desktop software to
Outlook, select Change your
synchronization method at the
end of the installation process.
Problems? See Troubleshooting below.

Troubleshooting

Support information is available also at www.palm.com/support
Your handheld does not turn on, or does not respond when you tap it
1. Try turning it on by pressing one of the quick buttons on the front panel.
2. Do a soft reset. Use the stylus to gently press the reset button inside the hole
on the back of the handheld.
3. Make sure the AC charger is fully connected to the handheld and to a working
outlet. Charge for another three full hours.
Palm Desktop Installer does not start when you put the CD into the drive
Windows:
1. Click the Start button and select Run.
2. Click Browse to locate the drive containing the CD that came with
your Palm Z22 handheld.
3. Double-click autorun.exe on the CD.
Mac:
1. Double-click the CD icon on the Mac desktop.
2. Double-click PalmSoftware.pkg.
1 1
Connect and charge
Note: Don't be surprised if your handheld doesn't respond to button presses or
taps before you fully charge it. This is normal.
a. Plug the AC charger into an outlet and connect it to the handheld.
b. Charge for three hours. Be sure to fully charge your handheld before
going on to the next step.
AC charger
Get answers, learn more
Where's my manual?
Take the tutorial
Synchronization does not begin
Be sure the sync cable is plugged into your handheld and into a USB port on your computer.
Check your computer:
Windows:
1. Make sure the HotSync
part of your screen.
If not:
a. Click the Start button and select Programs.
b. Select Palm, and then select HotSync Manager.
2. Check the connection type:
a. Disconnect and then reconnect the sync cable.
b. Make sure there is a checkmark next to Local USB.
If there is none, click Local USB.
Mac:
1. Make sure the HotSync Manager is enabled:
a. Double-click the HotSync Manager icon in the Palm folder.
b. In the HotSync Controls tab, click Enabled.
2. Make sure the USB connection is working:
a. Disconnect and then reconnect the sync cable.
b. Restart your computer.
Open Palm Desktop software and
click here for detailed device and
desktop software information.
Quickly learn to use your
handheld. Insert the installation
CD into your computer and click
here for an interactive tutorial.
®
Manager icon appears in the group of icons in the lower-right
HotSync Manager icon
2 2
Set up
a. Press the power button.
b. Remove the stylus.
c. Follow the onscreen instructions
to set up your handheld.
Tip: Take the Quick Tour to learn
more about the great features of
your Palm Z22 handheld.
Power button
Problems? See Troubleshooting below.
Look for these great features
On your computer
Palm Desktop software. Enter info in Palm Desktop
software and it shows up on your handheld the next time
you synchronize.
Quick Install (Windows)/Send To Handheld droplet
Install applications on your handheld the next time you
synchronize.
On your handheld
Calendar. Manage your schedule from single appointments
to weekly meetings.
Contacts. Store names, addresses, phone numbers–even
birthday info and a photo–for your important contacts.
Photos. View and organize photos on your handheld.
Use the companion desktop application to manage and
edit photos and copy them to your handheld.
Check your handheld:
1. Tap Home , and then tap HotSync on the Home screen.
2. In the HotSync application, verify the following:
– Local is highlighted. If it isn't highlighted, tap Local.
– The term Cradle/Cable appears. If not,
tap the pick list, and then tap Cradle/Cable.
3. Tap the HotSync icon on the screen.
HotSync icon
Cradle/Cable
Upgraders
Did you load any third-party applications on your previous handheld? You'll
have to update them if they are not compatible with your new handheld.
If any of the following symptoms occur on your new handheld after you
synchronize, remove these applications and contact the vendor for updated
versions: handheld freezes or resets when you open an application, slow
performance, unusual screen display, difficulties using handheld features,
uneven sound quality.
Stylus
(Mac).
Local