Flex BW 18.0-EC Original Operating Instructions page 18

Brief operation without engaged switch
rocker
 Press and hold down the switch.
 To switch off, release the switch.
Continuous operation with engaged
switch rocker
 Press and hold down the switch (1.).
 To lock into position, hold down
the locking button (2.) and release
the switch.
 To switch off, briefly press and release
the switch.
18
BW 18.0-EC / Detailing Set
Speed selection
The speed can be preselected in 3 stages
between 10,600 and 18,000 rpm.
Working with the power tool
CAUTION!
When it is switched off, the blower continues
to run briefly.
1. Mount nozzle on bayonet connection or
extension.
2. Insert battery.
3. Set the speed to the required setting.
4. Hold the power tool with one hand on the
handle and assume the working position.
5. Switch on the power tool.
At the end of work:
6. Release the switch.