Preparing For Maintenance; Training Period; Operating Tips - Toro Greensmaster 3300 Operator's Manual

1. Cap screws

Training Period

Before rolling greens, find a clear area and practice
starting, stopping, raising, lowering, and rolling with
the tri-roller.

Operating Tips

Maintain a straight line when rolling. Do not turn when
the tri-rollers are on the ground.
When the edge of the green has been reached,
raise the tri-rollers before turning or stopping. You
must completely raise the tri-rollers before making
turns. Survey the green to determine if there are
any obstacles that will be damaged or will result in
damage to the rollers, such as sprinkler heads and
protruding objects.
Figure 7
2. Washers
Maintenance

Preparing for Maintenance

Before starting on any maintenance procedure, do
the following:
1. Park the machine on a level surface.
2. Lower the roller units fully to the ground so that
the suspension hydraulics are fully extended.
3. Engage the parking brake, shut off the engine,
and remove the key.
Lubricating the Tri-Roller
g254873
Lubricate the 2 grease fittings
tri-roller unit after every 15 hours of operation, with
No. 2 lithium grease. Use a hand-operated grease
gun for best results.
1. Wipe each grease fitting with a clean rag.
2. Apply grease to the tri-roller shaft bearings until
you feel pressure
3. Wipe excess grease away.
5
(Figure 8) on each
(Figure 8).
Figure 8
g018317