Preventative Maintenance Schedule - Turbo Air WORKSHOP TA3050 Set Up And Operating Instructions Manual

PREVENTATIVE MAINTENANCE SCHEDULE
WARNING!
Before maintenance operation, stop the air compressor, disconnect the unit from the mains supply and discharge
all air in the air tank.
IMPORTANT! The pump oil must be changed after the first 10 hours of operation. This
will remove contaminants contained in the crankcase due to break-in Recommended
Compressor Oil: Use SAE30 for temperatures over 10
10.
DIRECT DRIVE COMPRESSOR
o
C and use SAE10 below 10
o
C.