Feature Menu - JVC AV-29ED5BN Instruction Manual

Autostore Menu:
The AUTOSTORE function automatically programmes the re-
ceived channels in your TV's programme numbers.
Before use this function, please confirm that the “LAN-
GUAGE” and “COUNTRY” setting are correct.
1. Press “ “ or “
item.
2. Press “ ” or “ ” button to enter the AUTOSTORE menu.
X6SIDIBÃÄ
6yyÃ…r†‡‚…rqÃ…‚t…h€€r†Ã
vyyÃirÃr…h†rqÄ
8‚‡vˆr
QD8 8hpry
• A warning message “All prestored programmes will be
erased!” appears in a message box.
3. Press “ ” button to start the AUTOSTORE function.
• To cancel the AUTOSTORE function, press the “PIC-
TURE” button.
6VUPTUPS@
6QTÃ DTÃ SVIIDIBÃ QG@6T@
X6DU
ÃÃÃÃÃÃÃà T‡h‡v‚ÃÃà 8uhryÃÃÃIh€r
IS
6VUPTUPS@
6QTÃ DTÃSVIIDIBÃ QG@6T@
X6DU
ÃÃÃÃÃÃÃà T‡h‡v‚ÃÃÃ8uhryÃÃà Ih€r
IS (
4. After the AUTOSTORE is finalized, the PROGRAM menu
appears.
Please see “Program Menu” on above section.

Feature Menu

• Press “MENU” button, now you are in main menu. In the
main menu, select FEATURE, using “
Then enter the feature menu pressing “ ” or “ ” button.
” button to select “AUTOSTORE”
Ã
8%# 8%#
“ or “
Sleep timer:
The sleep timer is used to turn the TV off after a defined peri-
od. Press “ ” or “ ” button to choose a priod of time after se-
lecting this item. The timer can be programmed between Off
and 120 minutes in steps of 10 minutes. One minute before
the "Sleep timer" function turns the TV off, the remaining
time will be displayed.
Child lock:
You can disable the control panel buttons (except the POW-
ER button) with this item.
Press “ ” or “ ” button to change the setting to ON or OFF
after selecting this item.
When you set this item to ON, the TV can be operated only
by using the remote control handset.
Warning: If Child Lock item is set to ON, the TV can not be
operated by VCR.
Setting External Source Output:
• You can use this menu to select the internal or external
source that will be output at EXT.2 (EXT-2) terminal.
• In the “FEATURE” menu select “EXT-2 Output” using “
or “ ” button. Then select the source you want to be out-
put at EXT-2 pressing “ ” or “ ” button (one of the sources:
TV, EXT-1 or EXT-3 (Front AV).
Blue Background During No-Signal:
The Blue Back feature can be set by “ ” or “ ” button to ei-
ther On or Off.
” button.
ENGLISH - 27 -
“