Feature Menu; Install Menu - JVC InteriArt LT-20DA6SK Instructions Manual

Selecting Sound Mode
• Using “ ” or “
Mode.
• Press “ ” or “ ” button to change Sound
Mode.
You can choose Mono, Stereo or Dual
(I-II) mode, only if the selected channel sup-
ports that mode.
In case of bilingual broadcast (Dual Sound),
you can select original or dubbed language
using mode option. So when somebody lis-
tens to the original language from the loud-
speakers, somebody else can listen to the
dubbed language from headphone.
To Store The Settings
In the Sound Menu, all settings are stored
automatically.

Feature Menu

Press “MENU” button, now you are in
mainmenu. In the main menu, select Fea-
ture using “ ” or “
the Feature menu by pressing “ ” / “ ” or
“OK” button.
Sleep Timer
The Sleep Timer is used to turn the TV off
after a defined period of time after selecting
this item. The timer can be programmed be-
tween Off and 120 minutes in steps of 10
minutes. (Off, 010, 020, 030, 040, ... , 120)
If sleep timer is activated, at the end of the
selected time, the TV goes automatically to
stand-by mode.
Child Lock
You can use this feature to prevent children
t u r n i n g t h e T V o n / o f f o r c h a n g i n g
programmes or adjustments etc. without re-
mote control.
” button select Sound
” button. Then enter
• Using “ ” or “
• Press “ ” / “ ” button to select Child Lock
On or Off .
The Child Lock feature can be set On or Off
by “ ” / “ ” button. When Off is selected,
there will be no difference in the operation of
your TV. When On is selected, the TV can
only be controlled by the remote control. In
this case the control panel buttons except
“ ” button on the right side of the TV will not
work.
Selecting Menu Language
• Using “ ” or “
• Press “ ” or “ ” button to select menu
language.
EXT-2 Output
From EXT-2 Output; TV, EXT-1, EXT-4 or
DIGITAL can be given. These modes can be
chosen by pressing “ ” or “ ” button on
“EXT-2 OUTPUT”.
Blue Back (During No Signal)
The Blue Back Feature can be set by “
“ ” button to either On or Off.
To Store Settings
In Feature menu all settings are stored auto-
matically.

Install Menu

Press “MENU” button, now you are in main
menu. In the main menu, select “Install” us-
ing “ ” or “
menu by pressing “ ” / “ ” or “OK” button.
- 30 -
” button select Child Lock.
” button select Language.
” button. Then enter the Install
” or