Using The Decoder (Ext-2) Function - JVC AV-29ED5BN Instruction Manual

in turn is connected to the EXT.2 terminal. To use this item,
please see the
“Using the Decoder (EXT-2) function” on the following sec-
tion.
Store:
After the all settings are completed, store the new channel’s
setting to the programme number which you selected.
• Press “ “ or “ ” button to select “Store”, then press
“ ” or “ ” to store it.

Using the Decoder (EXT-2) function

If you have a decoder connected to a T-V LINK compatible
VCR, which in turn is connected to the EXT.2 terminal, use
DECODER (EXT-2) to unscramble the scrambled TV chan-
nels.
1. Exit the menu.
2. Turn on the decoder power.
3. Display the scrambled TV channel on the TV. Even if the
decoder is working, a scrambled picture appears.
4. Display the “INSTALL.” menu again.
5. Press “ ” or “ ” button to select DECODER (EXT-2),
then press “ ” or “ ” button to set to “ON”
6. Press “ ” or “
“ ” button to store it. “T-V LINK” menu will appear after the
TV stores the setting.
7. Follow the operating procedure “Downloading the data
to VCR” on page 21 to transmit the revised programme
table data to the VCR.
• If you do not want to transmit, press “PICTURE” button
to exit the menu.
Note:
You can only use this item if you have a decoder connected
to a T-V LINK compatible VCR to EXT.2 terminal. Setting this
item to “ON” by mistake causes the picture/sound of a TV
channel you are currently viewing to disappear.
If this item has been set to “ON” but the TV channel cannot
be unscrambled, check the following:
• Has the decoder been connected to the VCR properly ac-
cording to the VCR and Decoder instruction manuals?
• Can the TV channel be unscrambled with a decoder?
• Do you need to change the VCR settings in order to con-
nect the decoder? Confirm that the VCR is set properly by
rechecking the VCR instruction manual.
Program Menu:
You can use the PROGRAM menu to change a programme
number, delete a channel.
” to select STORE, then press “ ” or
• Press “ “ or “
• Press “ ” or “ ” button to enter the PROGRAM menu.
To choose a channel in the PROGRAM menu:
Press “ “ / “
The colour of the programme number that you choose is
changed in the PROGRAM menu and you can view the pic-
ture of that channel.
Caution:
Using “DELETE” or “CHANGE” item rewrite the current chan-
nel list in the PROGRAM menu. Therefore, the programme
numbers of some of channels will change.
When you complete the settings of PROGRAM menu:
If you have a T-V LINK compatible VCR, press the “
ton to display the T-V LINK menu. Then follow the operating
procedure “Downloading the data to VCR” on page 21 to
transmit the Programme table data to the VCR.
If you do not have a T-V LINK compatible VCR, press “PIC-
TURE” button to exit the menu.
To change a programme number (CHANGE):
1. Select a channel that you want to change its programme
number.
2. Press Blue button to enter the CHANGE mode.
3. Press “
gramme number that you want to change the programme
number of the selected channel to.
4. Press Blue button. Two channels of the selected program-
me numbers will be exchanged.
To delete a channel (DELETE):
1. Select a channel that you want to delete.
2. Press Red button to delete it.
ENGLISH - 26 -
” button to select “PROGRAM” item.
QSPBS6H
 ÃÃÃÃ  ÃÃÃÃ !
! ÃÃÃÃ  ! ÃÃÃÃ !!
" ÃÃÃÃ  " ÃÃÃÃ !"
# ÃÃÃÃ  # ÃÃÃÃ !#
$ ÃÃÃÃ  $ ÃÃÃÃ !$
% ÃÃÃÃ  % ÃÃÃÃ !%
& ÃÃÃÃ  & ÃÃÃÃ !&
' ÃÃÃÃ  ' ÃÃÃÃ !'
( ÃÃÃÃ  ( ÃÃÃÃ !(
  ÃÃÃÃ ! ÃÃÃÃ "
puhtr
qryr‡r
v UWÃGvx
”/ “ ” / “ ” button.
“ / “ ”/ “ ” / “ ” button to select the pro-
ÃÃÃÃ
ÃÃÃÃ
ÃÃÃÃ
ÃÃÃÃ
ÃÃÃÃ
ÃÃÃÃ
ÃÃÃÃ
ÃÃÃÃ
ÃÃÃÃ
ÃÃÃÃ
” but-