Do you have a question about the BARISTA Series and is the answer not in the manual?
Questions and answers
Jorge l molina
June 1, 2025
My coffee maker is the AEW-3000 model. It's leaking where the coffee comes out. It seems to be the gasket. Where can I fix this? Thanks.
1 comments:
Mr. Anderson
June 1, 2025
You can fix a leaking gasket on the EspressoWorks AEW-3000 coffee maker by replacing the group gasket, which can be found under "Group Gaskets" in the espresso machine parts section.
Page 2
FIRST USE - UNLOCK MACHINE BLUE & RED Indicator Light Flashes At The Same Time Please follow the cleaning steps as listed below to unlock the machine before first use: Caution:...
Page 3
HEATING PROCESS BLUE Function Light Flashes Situation 1: Blue function light flashes when the power is on. (Flashing will occur for around 40 seconds). The Machine is ready when the blue light illuminates with double flashing lights. Situation 2: Blue function light flashes after a function is used (Flashing will occur for around 30 seconds).
Page 4
RUN OUT OF WATER RED Indicator Light Flashes RED Light keeps flashing when the machine has operated without water, and several beeps will sound in succession. Detach the water tank from the machine and fill it with water. ii. Place a cup underneath. iii.
Page 5
MACHINE IS CLOGGED Yellow indicator Light Flashes For long term use, we have included a program to avoid any clogging. In this case the yellow light will flash. Please follow the below "Deep Clean" steps to clear this up. STEP 1: Press and Hold the “CLEAN”...
Page 6
WATER LEAKS FROM THE MACHINE BOTTOM Leak Around The Machine Situation 1: The water tank is not placed properly in the machine. Solution 1: Situation 2: Filled water over 'MAX' line. Solution 2: Ensure that the water does not surpass the 'MAX' line. Situation 3: The drip tray is not placed properly.
Page 7
WATER LEAKS FROM THE MACHINE BOTTOM Leak Around The Machine Situation 4: Please contact us at CS@ESPRESSO-WORKS.CO.UK beside above 3 situation.
Need help?
Do you have a question about the BARISTA Series and is the answer not in the manual?
Questions and answers
My coffee maker is the AEW-3000 model. It's leaking where the coffee comes out. It seems to be the gasket. Where can I fix this? Thanks.
You can fix a leaking gasket on the EspressoWorks AEW-3000 coffee maker by replacing the group gasket, which can be found under "Group Gaskets" in the espresso machine parts section.
This answer is automatically generated