Handset Settings; Ring Settings; Tone Settings - Philips D270 User Manual

12 Handset
settings
You can customize the handset settings to
make it your own phone.

Ring settings

Set the handset's ringtone volume
You can select among 5 ringtone volume
levels or [OFF].
Note
• If the ringer volume is set to off, the
handset is silenced for all incoming calls
except paging tone.
1
Press .
2
Select [HS SETTINGS] > [RING SETUP]
> [RING VOLUME], then press
confirm each selection.
3
Select a volume level, then press
confirm.
The setting is saved.
Set the handset's ringtone
You can select from 10 ringtones.
1
Press .
2
Select [HS SETTINGS] > [RING SETUP],
then press
selection.
3
Select [EXT. RING] to set an external call
ringtone, then press
The setting is saved.
4
Select [INT. RING] to set an internal call
ringtone, then press
The setting is saved.
to confirm each
to confirm.
to confirm.

Tone settings

Set the key tone
Key tone is the sound made when you press a
key on the handset.
1
Press
2
Select [HS SETTINGS] > [TONE SETUP] >
[KEY TONE], then press
each selection.
3
Select [ON] or [OFF], then press
confirm.
The setting is saved.
Set the battery tone
Battery tone is the sound made when the
battery is low and needs recharging.
1
Press
2
Select [HS SETTINGS] > [TONE SETUP]
> [BATTERY TONE], then press
to
confirm each selection.
3
Select [ON] or [OFF], then press
to
confirm.
The setting is saved.
Set the "out of range" tone
"Out of range" tone is the sound made when
the handset is out of range and needs moving
closer to the base station.
1
Press
2
Select [HS SETTINGS] > [TONE SETUP]
> [OUT OF RANGE], then press
confirm each selection.
3
Select [ON] or [OFF], then press
confirm.
The setting is saved.
.
to confirm
.
.
to
to
to
to
to
EN 29