Table of Contents
Advertisement
Problem and alarm code
The displayed programme du-
ration is different than the du-
ration in the consumption val-
ues table.
The remaining time in the dis-
play increases and skips nearly
to the end of programme time.
Small leak from the appliance
door.
The appliance door is difficult
to close.
The appliance door opens dur-
ing the wash cycle.
Rattling/knocking sounds from
inside the appliance.
The appliance trips the circuit-
beaker.
Refer to "Before first use", "Daily
use", or "Hints and tips" for other
possible causes.
Once you have checked the appliance, deactivate
and activate the appliance. If the problem occurs
again, contact an Authorised Service Centre.
For alarm codes not described in the table, contact
an Authorised Service Centre.
THE DISHWASHING AND DRYING RESULTS ARE NOT SATISFACTORY
Problem
Poor washing results.
Possible cause and solution
•
The pressure and the temperature of the water, the variations of
the mains supply, the options, the quantity of dishes and the
degree of soil can change the programme duration.
•
This is not a defect. The appliance is working correctly.
•
The appliance is not levelled. Loosen or tighten the adjustable
feet (if applicable).
•
The appliance door is not centred on the tub. Adjust the rear
foot (if applicable).
•
The appliance is not levelled. Loosen or tighten the adjustable
feet (if applicable).
•
Parts of the tableware are protruding from the baskets.
•
The AirDry function is activated. You can deactivate the func-
tion. Refer to "Settings".
•
The tableware is not properly arranged in the baskets. Refer to
basket loading leaflet.
•
Make sure that the spray arms can rotate freely.
•
The amperage is insufficient to supply simultaneously all the ap-
pliances in use. Check the socket amperage and the capacity
of the meter or turn off one of the appliances in use.
•
Internal electrical fault of the appliance. Contact an Authorised
Service Centre.
Possible cause and solution
•
Refer to "Daily use", "Hints and tips" and the basket load-
ing leaflet.
•
Use more intensive washing programme.
•
Activate the ExtraPower option to improve the washing re-
sults of a selected programme.
•
Clean spray arm jets and filter. Refer to "Care and Clean-
ing".
WARNING! We do not recommend
using the appliance until the problem
has been completely fixed. Unplug the
appliance and do not plug it in again
until you are certain that it operates
correctly.
19
Advertisement
Table of Contents
