Advertisement
1
PIECES
x 4
1. REMOVE ENDCAPS
From the top unit, remove
the footer endcaps.
From the bottom unit,
remove the top endcaps.
2. REMOVE HEX SCREWS
From the bottom unit,
remove the four top corner
hex screws.
3. INSERT PLASTIC
CONNECTOR POSTS
Into the frame corners
of the bottom unit, insert
the plastic connectors,
following the INSTALLATION
TIP at the top of the page.
4. REPLACE HEX SCREWS
On the bottom unit, replace
the hex screws in each
corner, making sure to keep
the corner brackets in place.
5. STACK THE UNITS
After all corner connectors
and corner brackets are
installed securely, slide the
frame corners of the top unit
over the connector posts
on the bottom unit.
• Three cage units can
be stacked safely.
• Do not exceed three
stacked cages.
F070 + F075 — 03 /23 — A4B
Made in China for Prevue Pet Products, Inc., 224 N Maplewood Ave, Chicago IL 60612 USA • www.prevuepet.com • 1 [312] 243-3624 • customerservice @ prevuepet.com
Hampton Deluxe Cages
MODEL #
F070
HOW TO STACK
MODEL #
ASSEMBLED UNITS
F075
+
Instructions online at www.prevuepet.com
INSTALLATION TIP :
Use the allen wrench to keep the plastic
connector from going too deeply into the
frame, and to align the holes in the post
and frame.
CUSTOMER SUPPORT
For assistance or replacement parts,
please contact Prevue Pet Products:
PHONE
1 (312) 243-3624
ONLINE www.prevuepet.com
EM IL
customerservice@ prevuepet.com
TOOLS NEEDED :
An allen wrench and maybe
a screwdriver or pliers to
help in removing endcaps.
Advertisement
