Advertisement
1
PIECES
x 4
C
]
1
]
interchangeable
F
]
interchangeable
L
]
1
F070 — 03 /23 — A4.1
Made in China for Prevue Pet Products, Inc., 224 N Maplewood Ave, Chicago IL 60612 USA • 1 [312] 243-3624 • www.prevuepet.com • customerservice @ prevuepet.com
Hampton Deluxe
Divided Breeding Cage w/Stand
MODEL #
F070
ASSEMBLY
Instructions online at www.prevuepet.com
x 8
Insert the plastic connectors into the
top of the stand frames.
Align the bottom hole of the connector
with the hole on the frame leg.
1
1
R
]
1
Hand-tighten the hex screws
at the top to attach stand frame
sides to the front and back
frames.
Leave screws LOOSE for the
next step.
2
Insert the extended wires of
the storage shelf into the holes
along the inside lower rails of
the front and back frames.
Finish the stand assembly with
hand-tightened hex screws at
the bottom corners, and then
tighten ALL screws with the hex
key.
3
Insert casters into the base of
the frame legs. Position the
two locking casters where you
find them best suited for your
expected use.
INSTALLATION TIP :
Use the allen wrench to keep the plastic
connector from going too deeply into
the frame, and to align the holes in the
post and frame.
2
CUSTOMER SUPPORT
For assistance or replacement parts,
please contact Prevue Pet Products:
PHONE
1 (312) 243-3624
ONLINE www.prevuepet.com
EMAIL
customerservice@ prevuepet.com
3
Advertisement
