Advertisement
4
continued...
5
PIECES
F070 — 03 /23 — A4.4
C
]
7
Tap the endcaps into
each corner to finish
off the assembly.
For more wonderful cages, toys, and accessories for cats, birds, chickens, rabbits, ferrets, dogs and small animals, visit www.prevuepet.com
Leave the center divider
grille out for full-cage use,
or slip it in place to divide
the cage interior into two
separate spaces.
Set the roof panel into place.
Back the corner screw out
and slip a corner bracket
over the corner as shown in
the detail. Tighten the screw
to secure the bracket on the
corner.
Repeat the method for all
corners to fully secure the
roof in place.
Assembly completed.
Advertisement
