Floor Level - Bradbury Equipment H4441 Operation & Maintenance Instructions Manual

11
CHECK that the technical manuals are delivered with the lift (installation instructions, operation and
maintenance instructions, spare parts list, the EC-certificate of conformity, the electrical diagram in
the control box)
CHECK that all components are enclosed (see installation instructions T70729 and the accessory kit packing
list)
CHECK the lift for any paint damages occured during transportation, or paint faults from the
production
Follow the installation instructions T70729 delivered with the lift and check the following points:
PLATFORMS AT Cross beams rest against their stops at floor level (all cables loose)

FLOOR LEVEL

Posts are vertical in both directions
Right-hand platforms can be slid freely along cross beams
The two nuts for cables at top of posts are counter-tightened
Eccentric brake sensory rollers are free to rotate on axles
Oil level in accordance with "oil level control" (oil level: middle of sight glass)
Important signs/decals:
* Max. capacity
* Maintenance + safety instructions (placed on control post)
* Several warning labels
* Name plate with CE-label
PLATFORMS High pressure hose fittings are tight
HANGING IN Armoured hose hangs freely as a "U" without strain
RATCHETS AT Air system checked for leaks
APPROX. 1 M'S Platforms and cross beams are horizontal when lift is parked in ratchets
HEIGHT Cables are correctly fitted (see installation drawing)
NON LOADED Excess-pressure valve is activated when platforms reach the topmost
LIFT position (audible)
LOADED LIFT Platforms can be parked in the topmost ratchet holes (cable adjustment)
(APPROX. 1.5 T) Platforms can be released and lowered from topmost ratchet holes
(tolerance approx. 20 mm)
Nylon slide blocks on cross beams must not touch (tolerance 0-0.5 mm)
(post adjustment – cross beam adjustment). Check that ratchet rail does not fret the
cross beam
Platforms horizontal when hanging in cables with load and no air connected.
If the lift is adjusted correctly, ONE click is to be heard from the ratchets when raising
the lift. If not - adjust.
INSTRUCTION The end user has been thoroughly instructed in correct use and maintenance
Write any defects/faults on the enclosed note-scheme and return/fax a copy of this control
CONCLUSION list (both pages 11 and 12) to:
The above check-up has been made and the lift has been tested with a vehicle
RECEIPT (total weight
Serial No. of lift:
Responsible workshop manager:
CONTROL LIST FOR H4443/H4543
Bradbury Equipment
153-165 Bridge Street
GB- Northampton NN1 1QG
England
Tel. +44 (0) 1604 828 648
kg)
Installation date:
Fitter:
T61720
























