Page 1
WM-SB Wall Mount Scissor Boom INSTRUCTIONS...
Page 2
Introduction Thank you for choosing Impact. The Impact WM-SB is a pantograph-style boom that supports lights and accessories up to 11 pounds by moving your gear off the floor to minimize clutter and save space. This boom arm can be mounted to masonry or wood walls and features robust steel construction for a solid and dependable hold.
Specifications Type Wall-mount boom Reach from Mount Up to 55 in. (139.7 cm) Vertical Adjustment 31 in. (78.7 cm) Swivel 180° Riser Height Adjustment Up to 13 in. (33 cm) Mount 5/8 in. stud with 3/8-16 top Material Steel Dimensions (L × W × H) 51 ×...
Page 5
Setup Attaching the WM-SB to a Concrete Wall Caution! Make sure the concrete wall or block is solid and at least 6 inches thick. If the concrete exhibits cracks or other defects, this may result in failure of the concrete anchors and cause personal injury or damage your mounted equipment.
Setup Attaching the WM-SB to a Wood Wall or Surface 1. Use the mounting plates as templates to mark the small drilling holes 2. Hold the WM-SB in place and drill in four wood screws in both mounting plates. Height Adjustment...
Then tighten the pull lock until secure. Mounting Devices to the WB-SB The WM-SB can accommodate light fixtures and accessories with a 5/8- inch receiver or 3/8-16 socket. To mount devices with a 1/4-20 socket, use a 3/8-16 female to 1/4-20 male adapter (available separately).
One-Year Limited Warranty This Impact product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.