Button Functions: 08 Room Unit - Courtney Thorne 08 Room User Manual

Button Function: 08 Room Unit
Call: Pressing the yellow call button at the top of the 08
Room Unit, pressing the button on the pear push lead or
pulling the cord on the Pullcord unit will make a standard
'call' to your Display Panel. This would typically be used by
the service user to indicate that they require assistance.
Our pear push leads are also typically set to make a
standard call.
Emergency: The emergency button in red makes an
'emergency' call to your Display Panel. You will notice that
the sound intensity increases with this type of call. This
would be typically used when there is a high priority
situation and this type of call will always over-ride any other
calls because of the importance of the emergency situation.
6
Assistance: The assistance button in blue, when pressed,
makes an 'assistance' call to your Display Panel. The sound
intensity is higher than a standard call but not as high as an
'emergency' call. Typically this would be used if a member of
staff needed some assistance but it was not considered to be
an emergency situation for example, a member of staff needs
help lifting or using a hoist.
Reset: This button is pressed to reset any type of call that has
been made from the activated 08 Room Unit.
Should the system have 'presence' mode enabled, the reset
button activates the 'presence' function. For presence mode
explanation please speak to your Sales Consultant.