Table of Contents
Advertisement
Troubleshooting: 08 Room Unit
The red LED is on but it has not activated my display panel
Solution: The room unit has lost what is called its "House Code" Please refer to
the Room Unit Coding instructions below.
The red LED on the top right hand side is rapidly flashing.
The batteries need replacing in the room unit.
NB. Remove the battery cover from the back of the room unit and replace the 4 x
AA Alkaline batteries. Place the battery cover back on and press the reset button.
Display Panel says "L 1" (or Lead Fault on a CT Touch)
Check the lead for any signs of damage. If there are signs of damage then return
the item to your equipment provider.
Place this lead into another call point and press the call button on the lead. If the
lead is working correctly then the call point may have a faulty jack socket. This will
need to be return to your equipment provider.
Wrong number displayed when Room Unit is depressed
Please refer to the Room Unit Coding instructions below.
12
Advertisement
Table of Contents
