Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Courtney Thorne 08 Room
- Page 1 User Guide 08 Room Unit User Guide 08 Room Unit...
-
Page 2: Table Of Contents
Contents Product Overview: 08 Room Unit…………………………………………..3 Product Light Overview: 08 Room Unit……………………………………..4 Product Function & Product Description: 08 Room Unit………………..5 Button Functions: 08 Room Unit………………………………………….….6 Installation Guide: Room Unit and Pear Push Lead……………………...7 Installation Guide: Pullcord Unit for Bathrooms &Communal areas..8 Programming Instructions: Room Number……………………………..9-10... -
Page 3: Product Overview: 08 Room Unit
Product Overview: 08 Room Unit There are four buttons on the 08 Room unit; these can be altered to your needs but in a standard set-up they represent: Reassurance LED light Call Button Emergency Button Assistance Button Reset Button Jack Plug Sockets... -
Page 4: Product Light Overview: 08 Room Unit
Jack Sockets: On the bottom of the units there are two jack sockets which allow the use of both our pear push lead and/or another Courtney Thorne approved external trigger, for example, a pressure mat. -
Page 5: Product Function & Product Description: 08 Room Unit
Product Function: 08 Room Unit Designed for all areas where a care point is needed, the 08 Room Unit allows calls from users and staff. Units can come complete with either a pull cord or an IP rated pear push lead. They also include two sockets for pear push lead or auxiliary trigger- ing devices. -
Page 6: Button Functions: 08 Room Unit
Reset: This button is pressed to reset any type of call that has been made from the activated 08 Room Unit. Should the system have ‘presence’ mode enabled, the reset button activates the ‘presence’ function. For presence mode... -
Page 7: Installation Guide: Room Unit And Pear Push Lead
Room unit bracket Pear push lead Pear push lead bracket The 08 Room unit with Pear Push Lead should be fitted in the bedroom, on the side of the bed nearest the door. It should be fitted at shoulder height immediately next to the bed. -
Page 8: Installation Guide: Pullcord Unit For Bathrooms &Communal Areas
Installation Guide: Pullcord Unit for Bathrooms and Communal areas Pullcord Room unit with ring Bracket The Pull Cord Unit should be fitted in toilets, within easy reach of the toilet. In assisted bathrooms, the unit should be in reach of the bath and if the room is large you may also fit another pull cord by the toilet if there is one. -
Page 9: Programming Instructions: Room Number
Programming Instructions: Room Numbers 1. Press and hold the Reset button until 2. Press Emergency step once 3. Press Assistance 4. Let go of the Reset button once 6. Now the unit is in programming 5. Press Reset button mode once once Continued on next page... - Page 10 Programming Instructions: Room Numbers continued 8. For tens, Press the Assistance 7. For hundreds, press the Emergency button once button. E.g. 400, Emergency 4 times E.g. 30, press Assistance 3 times 10. With the new number now 9. For units, press the Reset button. programmed, press the Call button to E.g.
-
Page 11: Programming Instructions: House Code
Programming Instructions: House Code 1. Press and hold the reset button until step 4 2. Press Emergency once 3. Press Assistance once 4. Let go of the Reset button 5. Press Assistance twice 6. Press Reset the number of times required for your House Code E.g. -
Page 12: Troubleshooting: 08 Room Unit
Troubleshooting: 08 Room Unit The red LED is on but it has not activated my display panel Solution: The room unit has lost what is called its “House Code” Please refer to the Room Unit Coding instructions below. The red LED on the top right hand side is rapidly flashing. -
Page 13: Contact
Contact For any further questions or queries, please do not hesitate to contact us; Technical Support: Mon - Fri, 8.30am – 4.30pm 01202 573300 support@c-t.co.uk Out of Hours Technical Support: UK South - 07974 565 594 UK North - 07815 096 006 UK Scotland - 07594 784 931 For any Sales or Customer Service queries, please contact sales@c-t.co.uk...