Table of Contents
Advertisement
The motherboard provides one AGP slot, five 32-bit PCI bus slots and
one CNR slot.
AGP (Accelerated Graphics Port) Slot
The AGP slot allows you to insert the AGP graphics card. AGP is an
interface specification designed for the throughput demands of 3D graphics.
It introduces a 66MHz, 32-bit channel for the graphics controller to directly
access main memory. The slot supports 4x (1.07Gbps) and 8x (2.1Gbps) AGP
cards.
PCI (Peripheral Component Interconnect) Slots
The PCI slots allow you to insert the expansion cards to meet your needs.
When adding or removing expansion cards, make sure that you unplug the
power supply first. Meanwhile, read the documentation for the expansion card
to make any necessary hardware or software settings for the expansion card,
such as jumpers, switches or BIOS configuration.
CNR Slot
The CNR slot allows you to insert the CNR expansion cards. CNR is a
specially designed audio, or modem riser card for ATX family motherboards.
Its main processing is done through software and controlled by the
motherboard's chipset.
Slots
PCI Slots
CNR Slot
Hardware Setup
AGP Slot
2-23
Advertisement
Table of Contents
