1. Manuals
  2. Brands
  3. DeviceWell Manuals
  4. Monitor
  5. SDI 24-Screen Multiview
  6. User manual

DeviceWell SDI 24-Screen Multiview User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Users' Manual
SDI 24-Screen Multiview
MVP9124
VAR 1.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SDI 24-Screen Multiview and is the answer not in the manual?

Questions and answers

Related Manuals for DeviceWell SDI 24-Screen Multiview

Summary of Contents for DeviceWell SDI 24-Screen Multiview

  • Page 1 Users’ Manual SDI 24-Screen Multiview MVP9124 VAR 1.0...
  • Page 2 Precautions To ensure the reliability, use and safety of the equipment, please observe the following when installing, using and maintaining: Before the device is powered on, it is necessary to check to ensure that the chassis is well grounded to prevent electrostatic discharge from the chassis and endanger the equipment and personal safety, and to provide good shielding effect.

  • Page 3: Table Of Contents

    Contents 1. Product introduction ..................... 1 1.1. Product overview....................1 1.2. Main Functions ....................1 1.3. Product Parameters ..................... 2 1.4. Standard list ....................... 2 2. Operation and Function Description ................3 2.1. Equipment operation................... 3 2.2. Multiview mode description................3 2.2.1.

  • Page 4: Product Introduction

    1. Product introduction 1.1. Product overview This is a professional-grade SDI multiview that supports 24-channel SDI signal input and 2-channel 12G SDI output and 1-channel 4K60 HDMI output. You can use the front panel keyboard to change the display resolution to 2160P50 / 60, 2160p24/ 25 / 30. The device can be connected to 24-channel SDI signals, and can be used as a 24-channel switcher when single-screen full-screen display;...

  • Page 5: Product Parameters

    1.3. Product Parameters Product name SDI 24-Screen Multiview Input signal SDI HD serial digital video signal Bit rate 143Mbps~2.97Gbps Connector BNC complies with IEC169-8 standard Reflection loss >15dB 5MHz~3GHz SDI Input Signal amplitude 800mV±10% impedance 75Ω 100m Belden 1694A HD...

  • Page 6: Operation And Function Description

    2. Operation and Function Description 2.1. Equipment operation Note: please use the following installation sequence. If the installation sequence is not followed correctly, the equipment may not work or work normally。 (1) Connect the signal output port of the signal source to the input port of the equipment.

  • Page 7: -Screen Mode

    -screen mode 2.2.2. -screen mode 2.2.3.

  • Page 8: 4-Screen Mode

    -screen mode 2.2.4. screen mode 2.2.5.

  • Page 9: Key Board Operating Instructions

    2.3. Key board operating instructions 2.3.1. Full Panel During multi screen switching, you can select one channel for full screen display. Press the full panel to enter the full screen, and then press the channel to be selected (for example, press the fifth input in the 24 channels to display in full screen, press the full panel to enter the full screen, press in, and then press 5.
  • Page 10 The initial interface after running the software Set the communication mode interface Device operation interface...

  • Page 11: Screen Mode

    2.4.1. Screen Mode Click the mode drop-down bar, all window modes will be listed. After clicking the window mode to be displayed, all sub-modes in the mode will be listed below. Finally, click the sub-mode to be used, the icon will light green, and the device will output the corresponding picture mode.

  • Page 12: Menu Usage And Lcd Display Instructions

    2.5. Menu usage and LCD display instructions 2.5.1. Startup LCD status display After starting up, you can see the current mode status and resolution status of the device on the LCD panel. As shown below. 2.5.2. Menu interface Press the knob on the front panel to enter the main menu interface, as shown in the following figure...
  • Page 13 2.5.2.1. How to use the knob 1) Rotate clockwise to select downward. 2) Counterclockwise is the up selection. 3) When selected, the font background is blue. 4) Press to confirm. 2.5.2.2. System settings Select the system menu and press the knob to enter the system setting interface, as shown in the following figure System settings include language settings, LCD screen brightness settings and reset settings.
  • Page 14 2.5.2.3. Network settings Select the network and press the knob to enter the network setting interface. As shown below The IP of the device can only be obtained in static mode, and the static IP address can be set for the IP, subnet mask, and network management of the device. Set the IP address: select the IP address and press the knob →...

  • Page 15: Fault And Maintenance

    Devicewell for repair, and the freight shall be borne by the user and paid in advance. If the user returns the goods for any reason, all the freight, insurance premium, customs duty and other taxes and other expenses incurred shall be borne by the user.

  • Page 16: Appendix

    3. Repair the damage or failure caused by the use of parts not produced or provided by devicewell; 4. Carry out maintenance and repair for products modified or assembled with other products (the time required for maintenance and repair or maintenance difficulty will be increased after product modification or assembly).

Table of Contents