Hitachi 43FDX10B Service Manual page 20

CONNECTING EXTERNAL VIDEO SOURCES
CONNECTING A STEREO SOURCE TO INPUT1~INPUT5
1. Connect the cable from the VIDEO OUT of the VCR or the laserdisc player to the INPUT (VIDEO) jack, as shown on the TV set
below.
2. Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT (AUDIO/R) jack.
3. Connect the cable from the AUDIO OUT L of the VCR or the laserdisc player to the INPUT (AUDIO/L) jack.
4. Press the VID1~VID5 button to view the program from the VCR or laserdisc player. The VIDEO icon disappears automatically
after approximately eight seconds.
5. Press the VID1~VID5 button to return to the previous channel.
Back of
VCR
V L R
OUTPUT
VCR
Hitachi Model or
Similar Model
NOTES: 1. Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that is
played back will be abnormal if the connection is loose.
2. A single VCR can be used for VCR #1 and VCR #2, but note that a VCR cannot record its own video or line
output. Refer to your VCR operating guide for more information on line input-output connections.
ANT A
TO
CONVERTER
S-VIDEO
ANT B
VIDEO
(MONO)
L
R
AUDIO TO HI-FI
AUDIO
R L
INPUT 1
20
S-VIDEO
VIDEO Y/VIDEO Y/VIDEO
(MONO) (MONO) (MONO)
P P
B B
L L
L
P P
R R
R R
R
AUDIO AUDIO
AUDIO
INPUT 2 INPUT 4 INPUT 5
S-VIDEO
VIDEO
L
R
AUDIO
MONITOR
OUT