Hitachi 43FDX10B Service Manual page 19

CONNECTING EXTERNAL VIDEO SOURCES
CONNECTING AN S-VIDEO SOURCE TO INPUT 1, 2 AND 3
1. Connect the cable from the S-VIDEO OUT of the VCR or the laserdisc player to the INPUT (S-VIDEO) jack, as shown on the TV
set below.
2. Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT (AUDIO/R) jack.
3. Connect the cable from the AUDIO OUT L of the VCR or the laserdisc player to the INPUT (AUDIO/L) jack.
4. Press the VID1~VID3 button to view the program from the VCR or laserdisc player. The VIDEO icon disappears automatically
after approximately eight seconds.
5. Press the ANT button to return to the previous channel.
V
S-VIDEO
OUTPUT
Back of
VCR
VCR or Laserdisc Player
Hitachi Model or
Similar Model
NOTES: 1. Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that is
played back will be abnormal if the connection is loose.
2. A single VCR can be used for VCR #1 and VCR #2, but note that a VCR cannot record its own video or line
output. Refer to your VCR operating guide for more information on line input-output connections.
L R
Rear Panel of Television
ANT A
TO
CONVERTER
S-VIDEO S-VIDEO
ANT B
VIDEO VIDEO
(MONO) (MONO)
L
L
R
R
AUDIO TO HI-FI
AUDIO AUDIO
R L
INPUT 1 INPUT 2
19
S-VIDEO
VIDEO
Y/VIDEO Y/VIDEO
P (MONO) P (MONO)
B B
L L L
P P
R R
R R R
AUDIO AUDIO AUDIO
MONITOR
INPUT 4 INPUT 5
OUT