SCS Sentinel prim CamFirst OUTDOOR SVI0066 Manual page 21

D- INSTALLATION D- INSTALLATION
1. Test the correct functioning of the camera at the desired location. The range must
be sufficient.
2. Attach the camera using screws and wall plugs adapted to the support (screws and
wall plugs provided are for solid walls). The cable slot should be at the bottom.
3. Make sure the camera is securely attached to prevent
it from falling.
Loosen the screw to
move your camera
and make space for
the wall mount
Tighten the screw after moving
the camera to the desired angle
If you wish, you can insert a micro SD memory card (4 Gb - 128 Gb) in the camera in
order to store video sequences in the camera. A micro SD card is required to access
the video history from the app.
Insert the micro SD card
here, reinstall the sealing
tab and start the camera.
Attach to wall
The adaptor must be plugged in inside
EN
21