SCS Sentinel prim CamFirst OUTDOOR SVI0066 Manual page 19

Adding the camera
1.
Click on "NEW
DEVICE" to
add your camera.
4.
Scan the QR code displayed on
your phone with the camera and,
after the beep, press «yes».
WIFI
2.
Enter your wi-fi key
and scan the QR
code on your camera
or enter the code
manually.
Plug in the camera's power cable and place it
close to your Wi-Fi router. Your phone must be
connected to the same Wi-Fi network as your
camera and the location must be activated.
Wait for the sound signal.
Some materials may reduce the Wi-Fi range.
200 m
80%
60-70%
50-70%
20-50%
<10%
The network
needs to be
2.4 GHz to
work.
2.4 GHz
5.
Enter a name for the
camera and the room in
which it is located.
Free field
100%
Wood, glass
Bois, verre / wood, glass
Plasterboard
Cloison placoplatre / plasterboard
Stone
Pierre / stone
Béton / concrete
Concrete
Métal / metal
Metal
3.
When the red light flashes
and you hear a beep, press
«view QR code». If the
camera does not announce
anything, press the reset
button for 5s and repeat the
operation.
6.
Add a profil picture
from your camera,
the gallery or
select a picture by
default (product
visual or last
motion capture).
EN
19