S4A ED100 Quick Start Manual page 16

Parameter adjustment
remote control
Remote learning button
Electric lock +
Opening speed
Emergency power supply +
Door opening angle
COM
Closing speed
Double door interlock (in)
Closing buffer angle
COM
Hold open time
Double door interlock (out)
Reserved function
Double door synchronization (in)
COM
Double door synchronization (out)
Remote learning button
K1 Opening direction selection
K2 Master driven door selection
K3 Choose PUSH arm or PULL arm
K4 Tightness selection
Normally closed
automatic
Sensor power supply
Controller and controller pair code description
Sensor power supply
Sensor signal
Sensor signal
+12V
0V
1. Empty: Press and hold the. Remote Learning Key" button to
COM
know that you can't hear the buzzer sound and release the button.
Open. the door for
collision/ start
Crashproof when
closing the door
Entrance guard signal
2. Pair code: Press the"Remote Learning Key" button and the
buzzer will sound. At this time，press any button on the remote
control, and the buzzer will beep three times， indicating that the
code is successful. The buzzer will beep when using the remote
control
Normally open
3. Note: When using the remote control， the buzzer will beep twice,
indicating that the remote control and the controller are not
successfully coded. Please repeat item 2.
Point move
Press the "inching button" button, the door switch once