URBAN OUTFITTERS EBBA 81291577 Assembly Instructions

MIRROR: EBBA MIRROR

Assembly Instructions

TOOLS REQUIRED BUT NOT INCLUDED:

Phillips head screwdriver, pencil, level

Do not throw away packing materials and carton until after assembly

Assemble all parts on a clean smooth surface

Avoid direct exposure to sunlight. Do not place over heat or Air conditioning vents.

Adjust levelers so that the furniture sits flat on uneven floors.

Blot spills do not rub, with a clean white cloth.

Do not use harsh chemicals.

Before cleaning any part test a small spot in a hidden area.

You may need to re-tighten all bolts after initial use.

(A) Anchor

[12x12x42mm] X4

EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.

Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.

(B) Screw

[4x4x38mm] X4

68"

30x68x2.7"

30"

(D) Mirror X1

Page 1

Table of Contents

Do you have a question about the EBBA 81291577 and is the answer not in the manual?

Page 1 (D) Mirror X1 [12x12x42mm] X4 [4x4x38mm] X4 EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC. © 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights. Page 1 Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
Page 2 (A) using a phillips head screwdriver. If screwing into studs, no anchor is required. STEP 2 With help, hang the mirror (D) onto Cleat (C) to complete assembly. EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC. © 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights. Page 2...