Advertisement
STEP 4
7
1. Unlock the plate by pushing the grey
part.
2. Insert the screw into the plate.
3. Lock by pushing the grey piece in the
other direction.
4. Unscrew, insert the end of the arch and
screw again.
8
DEFINING THE POSITION
NO
NO
YES
OF THE BIMINI
1. Unfold the Bimini.
2. Tighten the straps slightly.
3. Position it on the area of the boat to
be protected. Be careful not to place
the Bimini too far forward or too far
back (see diagrams opposite).
4. Once correctly positioned, mark the
location of each of the attachments
with a pencil, for the feet and for the
rear supports.
Assembly instructions – March 2023
5
ACCESS BIMINI SUMMERTOP ALU WITH SELVEDGE
Advertisement
