Advertisement
Operation
Media player functions
PLAY/PAUSE
Switch player mode between play and pause. Hold this button at FM mode in
order to start radio station auto scan. Press this button rapidly in order to toggle
FM frequency auto/manual scanning mode.
FORWARD / BACKWARD
Single short press in music and Bluetooth modes will change currently playing
track. Holding buttons for few seconds Increase or decrease volume level of
media player. In FM mode use these buttons to change FM frequency in 0.1
MHz steps, also switch radio presets.
PLAY FROM USB
When a USB memory stick is inserted into the USB port, the track number and
time will show in the display and audio files will start to play automatically.
REPEAT AND RANDOM PLAY
Select one of three modes:
RTA – Repeat all tracks.
RT1 – Repeat one track.
RND – Random play
Second function of this button is to save FM radio frequency to selected preset.
MUTE / POWER
Press this button to mute audio. Hold this button longer in order to turn off/on
media player.
06
USER MANUAL
DMPA Light Media Player Amplifier
FM radio receiver
FM radio receiver allows to save 26 presets with selected radio stations. It uses
the same control buttons, but with a different functionality (pictured below).
HIDDEN FUNCTIONS
MANUAL/
DOWN
AUTO SCAN
UP
SAVE
EXIT
MODE
REPEAT
ENTER TO AUTO TUNING MODE
Press and hold Play/Pause button for few seconds to scan available stations and
store them as presets. Press and hold Play/Pause button for few second to abort
auto tuning.
To step through presets, press the Previous or Next buttons.
ENTER TO MANUAL TUNING MODE
Press Play/Pause button to enter manual tuning mode. Use Backward/Forward
button to adjust frequency in 0.1 MHz steps. Press Repeat button to select
preset number and change it by using Backward/Forward buttons. Press Repeat
button again to save radio station to preset.
Press Mute button to exit manual frequency adjusting without saving radio
station preset.
Operation
Bluetooth
PAIR
1. Enter Bluetooth mode on your DMPA Light media player.
2. Open the Bluetooth settings menu on your mobile device and search for
"AMC Player_0000" in the list of available devices.
3. Select "AMC Player_0000" and confirm that it is connected as an audio device.
CONTROL
Backward, Forward and Play/pause buttons control audio player on your mobile
device.
Holding the Backward or Forward buttons will adjust the output volume of the
mobile device.
RENAME
Customize device Bluetooth name by holding Play/Pause button until
"AMC Player_0000" is displayed. It is possible to change 4-digit part of the name.
Press backward or Forward buttons to edit the number and Play/Pause to select
another character.
Hold Play/Pause to save changes and exit.
Android devices have the facility to re-name devices within the Bluetooth
settings menu. If the Bluetooth ID has been re-named on the Android device,
editing the Bluetooth ID on the media player will not affect the name displayed
on that Android device.
USER MANUAL
DMPA Light Media Player Amplifier
07
Advertisement
