Racelogic MFD Touch Manual page 119

Logging Beep
Select to enable an audible alert signal when the logging state of the connected VBOX unit changes. There are different
tone sounds for when the connected unit starts and stops capturing data (including pausing logging in log when moving).
VBOX Information
The VBOX Information menu is the final screen in the Settings menu. It displays the device serial number, firmware
version number, and hardware version number. This information is useful in the event you need to troubleshoot a
potential issue with the MFD Touch device.
Decel Test Settings
There are 2 DECEL TEST SETTINGS screens available. You can toggle between these by pressing the
Forward or Back arrows at the bottom right of the screen or by swiping left or right. You can change the settings by
pressing the corresponding button next to an option.
https://en.racelogic.support//Product_Info/Displays/MFD_Touch/MFD_Touch_User_Guide/05_-_MFD_Touch_Settings
119